Language; Warning Messages; Table 4.8 Selectable Languages - ashtech Z-Xtreme Operations & Reference Manual

Language

Allows you to select the language of the screen messages. Table 4.8 lists the
available languages.
If warnings were generated before changing the language, they will remain in the original language
even after the language is changed. Only new warnings will be displayed in the selected language.
• Beep
Allows you to turn the beeper on or off (default is on).
• Save
Saves the current values of the user parameters to the battery backed-up
memory so they can be restored when powering the receiver back on.

Warning Messages

The receiver checks a number of conditions that are of interest to the user.
Whenever one of these conditions is true, the display is interrupted to show a
message, called a warning, stating what the condition is. The warning message
flashes to distinguish it from a regular menu, and the beep comes on for 1 second
every 10 seconds (unless disabled). When you have acknowledged the warning
(by pressing any key), the display returns to whatever it was displaying before being
interrupted, and the beep stops. At times, the receiver can generate several
warnings at once. In this case, the receiver displays the highest priority warning
until it is acknowledged. The receiver then displays the remaining warnings in
sequence, according to their priority.
40

Table 4.8 Selectable Languages

Language
English ENGLISH
French FRANCAIS
German DEUTSCH
Italian ITALIANO
Spanish ESPANOL
Z-Xtreme Operations and Reference Manual
Display