Plate Latch Lever (Fd), Spring Latch Lever (Fd) - OKIDATA OKIPAGE 8c Service Manual

3.3.31 Plate Latch Lever (FD), Spring Latch Lever (FD)

1. Remove the cover assy side (R), cover assy OP panel, cover front (R) and the cover front (L). (See
3.3.8.)
2. Open the cover CU. (See 3.3.11)
3. Unplug the cable (1).
4. Unscrew the screw (2) then remove the bracket SW (side) (3).
5. Unscrew 4 screws (4) then remove the stay upper (front) (5).
6. Remove the plate latch lever (FD) (6) and spring latch lever (FD) (7) with the side frames spread. (Be
careful not to spread the frames too much).
Figure 3.3.31 Plate Latch Lever (FD), Spring Latch Lever (FD)
Service Guide - OKIPAGE 8c
Chapter 3 Disassembly
Page: 58