Left Ground Plate - OKIDATA ML590 Service Manual

3.2.16 Left Ground Plate

1. Perform these procedures:
3.2.01
3.2.06
3.2.07
2. Cut the nylon tie and release the cable. (Not shown).
3. Work the left ground plate (1) up, and then out, to remove it.
P/N 51010301 Plate: Left Ground
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
RSPL Both B.2.03
Page: 108