Cleaning - OKIDATA ML590 Service Manual

Page: 136
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
3.4

CLEANING

An accumulation of paper dust is the most frequent cause of print quality problems in a
dot matrix printer. Small pieces of paper can cause paper jams. A dirty platen will smudge
paper. It is important to clean the printer regularly, paying particular attention to the printhead area
and the paper paths.
If the lubrication procedures are not performed properly, the printer will require more frequent
cleaning. Excessive lubricant attracts dust and accumulations build up quickly.
Keeping the covers in place and performing the cleaning procedures correctly will help ensure the
highest quality printer output.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)