3.4
CLEANING
WARNING:
When cleaning the printer, turn the power switch OFF and remove the AC power
cable from the printer of AC outlet.
3.4.01
General Information
An accumulation of paper dust is the most frequent cause of print quality problems in a dot
matrix printer. Small pieces of paper can cause paper jams. A dirty platen will smudge paper.
It is important to clean the printer regularly, paying particular attention to the printhead area and
paper paths.
If the lubrication procedures are not performed properly, the printer will require more frequent
cleaning. Excess lubricant attracts dust and accumulations build up quickly.
Keeping the covers in place and performing the cleaning procedures correctly will help ensure
the highest quality printer output.
1. Cleaning Interval: Every six months or 300 Operating Hours
2. Cleaning Tools
Lint free cloth
Soft cloth
Vacuum cleaner
Platen cleaner
Long cotton swabs
All Purpose Cleaner
Maintenance
3 - 100
Pacemark 3410 Service Handbook