Pull-Up Roller Assembly - OKIDATA ML590 Service Manual

Page: 97
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly

3.2.05 Pull-up Roller Assembly

1. Perform this procedure:
3.2.01
2. Open the access cover (1).
3. Open the cover of the pull-up roller assembly (2).
4. Press at A while rotating the assembly towards the back of the printer.
5. Remove the assembly.
NOTE:
Lubrication
When lubricating, refer to Section 3.5 of this Service Handbook.
P/N 53341501 Roller: Pull Up Assembly(Narrow) RSPL 590 B.2.04