Bail Motor/Gear Assembly - OKIDATA Pacemark 3410 Service Handbook

3.2.27

Bail Motor/Gear Assembly

1. Remove the printer mechanism (3.2.07).
2. Disconnect connector CN2 (1).
3. Remove the two mounting screws (2) and detach the bail motor/gear assembly (3).
NOTE:
When assembling, install the bail/ribbon motor assembly so that the gear backlash is at
a minimum.
P/N 56506301 Motor: Step (Bail Arm) Assembly
Maintenance
RSPL
3 - 58 Pacemark 3410 Service Handbook
B.2.06