Operation Panel Pcb (Leop) - OKIDATA ML320 Turbo Service Manual

Page: 38
Service Guide ML320/321Turbo
Chapter 3 Parts Replacement

3.3.14 Operation Panel PCB (LEOP)

(see 3.3.4 ).
(1) Remove the upper cover
(2) Disconnect cable 1 from connector 3 of driver board 2.
(3) Disengage claws on both sides from the frame, and remove the operation panel 4.
(4) Open claws (8 places) and remove the operation panel PCB 5 from the operation panel 4 .
(5) To install, follow the removal steps in reverse order.