User Maintenance Mode Menu System - OKIDATA OKIPAGE 8c Service Manual

(i) Operator panel menu disable
Enables or disables the menu functions (Menu1, Menu2, Tray Type, Power Save, and
Paper Size) of the operator panel.
(j) X adjust
1. Corrects the position of the whole print image so that it may be perpendicular to the
movement of paper (at intervals of 0.25mm).
2. The print image exceeding the specified printable area is clipped.
(k) Y adjust
1. Corrects the position of the whole print image so that it parallels the movement of
paper (at intervals of 0.25mm).
2. The print image exceeding the specified printable area is clipped.
(l) Darkness (Yellow, Magenta, Cyan and Black)
Sets the printout density of each color.
(m) SETTING
Used for fine adjustments when the operational environment, of the use of special
paper, etc may produce a prominent blur and dispersion on the printed output. Executes
a Print Quality correction for continuous use of special environment and media. When
scattered printing or snow flake-like printing is output, it should be decremented. When
the printing becomes scratchy, it should be incremented. Press the ENTER key to write
the setting to the EEPROM.
(n) Color Register Adjust Execute
Sets values for correcting X-axis, diagonal, and Y-axis deviations of the LED heads
(yellow, magenta, and cyan) relative to black. The tandem-type page printer is equipped
with an array of image drum (I/D) units which cannot be free from generation of color
deviations. The color deviations are main scanning, sub-scanning, and diagonal
deviations. These mechanically-caused color deviations are corrected electronically.
Category
MENU
RESET
HEX DUMP
YELLOW DRMCNT
RESET
MAGENTA DRMCNT
RESET
CYAN DRMCNT
RESET
BLACK DRMCNT
RESET
FUSER COUNT
RESET
BELT COUNT RESET
OIL ROLLER COUNT
RESET

User maintenance mode menu system

Selection DF After pressing
[ENTER] key
MENU
RESETTING
ON-LINE
HEX DUMP
YELLOW DRMCNT
RESETTING
MAGENTA DRMCNT
RESETTING
CYAN DRMCNT
RESETTING
BLACK DRMCNT
RESETTING
FUSER COUNT
RESETTING
BELT COUNT
RESETTING
OIL ROLLER COUNT
RESETTING
After completing the
process
MENU
RESET
YELLOW DRMCNT
RESET
MAGENTA DRMCNT
RESET
CYAN DRMCNT
RESET
BLACK DRMCNT
RESET
FUSER COUNT
RESET
BELT COUNT RESET
OIL ROLLER COUNT
RESET