Erase All Programs; Clear A Scene Or Scenes - GLP Light Operator 48 User Manual

2. Operation Guide
2.2 Editing

2.2.3 Erase All Programs

RECORD
1. Press and hold the Record button.
2. Tap the Flash buttons 1, 4, 2 and 3 in sequence while holding the Record
button. All LEDs will flash, indicating all programs stored in memory have
been erased.

2.2.4 Clear a Scene or Scenes

REC
CLEAR
13
+
RECORD
1
1. Record enable.
2. Record a scene or scenes.
3. If you are not satisfied with the scene or scenes,
you may tap the Rec Clear button while pressing
and holding the Record button, all LEDs will flash,
indicating the scenes have been cleared.
4 2 3