Draining control circuits
e
Attention:
Do not allow brake fluid to come into contact with
painted parts of the motorcycle as brake fluid de-
stroys paint.
Draining front control circuit
•
Turn the front wheel to a position in which the
brake fluid reservoir is horizontal and secure the
handlebars in this position.
•
Wrap cloths around the reservoir.
•
Remove front reservoir cap with rubber dia-
phragm.
•
Draw off old brake fluid and clean the reservoir.
•
Draw off the brake fluid from the circuits in the
correct sequence, using ring
spanner, BMW No. 34 2 532:
–
front metering cylinder (1),
–
front integral circuit (2) and
–
front control circuit (3).
34.18
Draining rear control circuit
•
Remove rear reservoir cap with rubber dia-
phragm, draw off the old brake fluid and clean
the reservoir.
1
3
•
Draw off the brake fluid from the circuits in the
correct sequence, using ring
spanner, BMW No. 34 2 532:
2
–
rear metering cylinder (4),
–
rear integral circuit (5) and
–
rear control circuit (6).
R28340110
5
6
4
R28340110