Automatic Stability Control; (Asc) - BMW R 1200 RS 2016 Rider's Manual

ABS Switching on
4
70
Press and hold the 1 button
z
until the ABS indicator and
warning light display changes.
NOTICE
You have the option of activating
the ABS function while the mo-
torcycle is on the move.
goes out. If self-diagnosis
has not completed, the in-
dicator and warning light starts
flashing.
Release button 1 within two
seconds.
remains off or continues to
flash.
Anti-theft alarm (ABS) is
switched on.
You also have the option of
switching the ignition off and
then on again.
ABS fault
An ABS fault has occurred if
the ABS telltale and warning
light shows when the motor-
cycle accelerates to a speed
in excess of the minimum
stated below after the igni-
tion was switched off and then
on again. (Minimum speed:
5 km/h)
Automatic Stability
Control (ASC)
Switching off ASC/DTC
NOTICE
See the section entitled "Engin-
eering details" for more informa-
tion on ASC and DTC.
Switching on ignition (
Press and hold the 1 button
until the ASC/DTC indicator
and warning light display beha-
viour changes.
48).