Printing Problems - Dell B2375dfw Mono User Manual

Printing Problems

Condition
The printer does
not print.
Possible cause
The printer is not
receiving power.
The printer is not
selected as the
default printer.
Check the printer
for the following:
The connection
cable between the
computer and the
printer is not
connected
properly.
The connection
cable between the computer that is working properly and print a
computer and the job. You can also try using a different printer
printer is defective. cable.
The printer may be
configured
incorrectly.
The printer driver
may be incorrectly
installed.
The printer is
malfunctioning.
Suggested solutions
Check the power cord connections. Check the
power switch and the power source.
Select Dell B2375dfw Mono MFP or Dell
B2375dnf Mono MFP as your default printer in
your Windows.
Click the Start button Settings
Right-click the Dell B2375dfw Mono MFP or
Dell B2375dnf Mono MFP printer icon and
select Set as Default Printer.
• The front or rear door is not closed.
• Paper is jammed.
• No paper is loaded.
• The toner cartridge is not installed.
If a printer system error occurs, contact your
service representative.
Disconnect the printer cable and reconnect it.
If possible, attach the cable to another
Check the printer properties to ensure that all
of the print settings are correct.
Remove the printer driver and then reinstall it;
see "Uninstalling Software" and "Using Wireless
Setup Utility" respectively.
Check the display message on the operator
panel to see if the printer is indicating a system
error.
- 327
­
→
Printers.