Download  Print this page

Advertisement

– Port Number : Enter the default port number from 1 to 65535. 445is set as a
default value.
Standard port number for SMB over NetBIOS is 139.
Standard port number SMB over TCPIP direct is 445.
– Make to Default Server : Select to make it a default server.
Additional Information
– Backup Server : Enter the backup server.
– Port Number : Enter the backup port number from 1 to 65535. 445is set as a
default value.
4
Click Apply.
Deleting a SMB server
1
From the Embedded Web Service, select the Security tab
External Authentication Server
2
From the SMB server list, check the server(s) you want to delete.
3
Click the Delete button.
4
A confirmation message appears, click Yes.
Editing a SMB server
1
From the Embedded Web Service, select the Security tab
External Authentication Server
2
From the SMB server list, check the server(s) you want to edit and click Edit.
A pop-up window appears.
3
Change the necessary information.
4
Click Apply.
Testing a SMB server
1
From the Embedded Web Service, select the Security tab
External Authentication Server
2
From the SMB server list, check the server you want to test.
NOTE: The server to be tested should be selected from the list of servers that were
added by using the adding a server feature.
3 Click the Test button.

LDAP Server

You can set LDAP server settings.
Adding a LDAP server
1
From the Embedded Web Service, select the Security tab
External Authentication Server
SMB Server.
SMB Server.
SMB Server.
LDAP Server.
- 121
­
Network Security
Network Security
Network Security
Network Security

Advertisement

Table of Contents

   Related Manuals for Dell B2375dfw Mono

This manual is also suitable for:

B2375dnf mono

Comments to this Manuals

Symbols: 0
Latest comments: