Access point via USB cable in Windows
Items to prepare
Software CD that was provided with your machine
The machine installed with a wireless network interface
Check whether the USB cable is connected to the machine.
Turn on your computer, access point, and machine.
NOTE: If the "Found New Hardware Wizard" appears during the installation
procedure, click Cancel to close the window.
Insert the supplied software CD into your CD/DVD drive.
The software CD should automatically run and an installation window will appear.
If the installation window does not appear, click Start
X:\Setup.exe replacing "X" with the letter, which represents your CD/DVD drive and
click OK .
For Windows 8,
If the installation window does not appear, from Charms, select Search
search for Run. Type in X:\Setup.exe, replacing "X" with the letter that represents your
CD/DVD drive and click OK .
If "Tap to choose what happens with this disc." pop-up window appears, click the
window and select Run Setup.exe.