Download  Print this page


5 Select Wireless.
6 The software searches the wireless network.
NOTE: If the software has failed to search the network, check if the USB cable
is connected properly between the computer and machine, and follow the
instruction in the window.
7 After searching the wireless networks, a list of wireless networks your machine has
searched appears.
If you want to use the Dell default ad hoc setting, select the last wireless network on
the list, Network Name(SSID) is Dell_device and Dell_Signal is Printer Self Network.
Then, click Next.
If you want to use other ad hoc settings, select another wireless network from the list.
NOTE: If you want to change ad hoc settings click the Advanced Setting
– Enter the wireless Network Name: Enter the SSID of access point you want (SSID
is case-sensitive).
– Operation Mode: Select ad hoc.
– Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz).
– Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may not be
used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key can
access the network.
- 233


Table of Contents

   Related Manuals for Dell B2375dfw Mono

This manual is also suitable for:

B2375dnf mono

Comments to this Manuals

Symbols: 0
Latest comments: