Download  Print this page

Advertisement

Condition
Pages print, but are
blank.
The illustrations
print incorrectly in
Adobe Illustrator.
The print quality of
photos is not
good. Images are
not clear.
The machine
prints, but the text
is wrong, garbled,
or incomplete.
Before printing, the
machine emits
vapor near the
output tray.
Possible cause
The toner
cartridge is
defective or out of
toner.
The file may have
blank pages.
Some parts, such
as the controller
or the board, may
be defective.
The setting in the
software
application is
wrong.
The resolution of
the photo is very
low.
If you are under
the DOS
environment, the
font setting for
your machine may
be set incorrectly.
Using damp paper
can cause vapor
during printing.
Suggested solutions
Thoroughly shake the toner. See "Redistributing
Toner".
If necessary, replace the toner cartridge.
Check the file to ensure that it does not contain
blank pages.
Contact a service representative.
Print the document by selecting Download as
Bit Image in the Advanced window of the
Graphic properties.
Reduce the photo size. If you increase the
photo size in the software application, the
resolution will be reduced.
Suggested solutions: Change the language
setting. See "Using the Dell Supplies Ordering
Utility".
This is not a problem. Just keep printing.
- 329
­

Advertisement

Table of Contents

   Related Manuals for Dell B2375dfw Mono

This manual is also suitable for:

B2375dnf mono

Comments to this Manuals

Symbols: 0
Latest comments: