Basic Printer Problems
Some printer problems can be easily resolved. If a problem occurs with your printer, check each of the following:
The power cable is plugged into the printer and a properly grounded electrical outlet.
The printer is turned on.
The electrical outlet is not turned off at any switch or breaker.
Other electrical equipment plugged into the outlet is working.
All options are properly installed.
If you have checked all of the above and still have a problem, turn off the printer, wait for 10 seconds, and then turn
on the printer. This often fixes the problem.
If error messages are displayed on the LCD panel or on your computer screen, follow the on-screen instructions to
resolve the printer problems. For details about error messages and status codes, see "Understanding Printer Messages."
Menu settings changed from the operator
panel have no effect.
Panel Lock Control
Job did not print or incorrect characters
Settings in the software program, the printer driver, or the printer utilities are
overriding the settings made on the operator panel.
is set to
, you need to enter the four-digit password to enter the
Ensure that the top menu appears on the LCD panel before you send a job to
print. Press the
(Menu) button to return to the top menu.
Ensure that the print media is loaded in the printer. Press the
to return to the top menu.
Verify that the printer is using the correct Page Description Language (PDL).
Verify that you are using the correct printer driver.
Ensure that the correct USB or Ethernet cable is securely connected to the printer.
Verify that the correct print media size is selected.
If you are using a print spooler, verify that the spooler has not stalled.
Check the printer's interface from the
Determine the host interface you are using. Print a panel settings report to verify
that the current interface settings are correct.
Check if the
is displayed on the LCD panel. If
shown, cancel the envelope mode. For details on canceling the envelope mode, see
"To Cancel the Envelope Mode."