9 When the wireless network settings are completed, disconnect the USB cable
between the computer and machine. Click Next.
NOTE: If the Change PC Network Setting window appears, follow the steps in
Click Next if you are finished with the computer's wireless network settings.
If you set the computer's wireless network on DHCP, it will take several minutes to
receive the IP address.
10 The Wireless Network Setting Complete window appears. To print from a Wi-Fi Direct
supported mobile device, set the Wi-Fi Direct Option.
NOTE: Wi-Fi Direct Option:
– Wi-Fi Direct option appears on the screen only if your printer supports this feature.
– Can start to build Wi-Fi Direct by using Dell Printer Manager
– Network Name(SSID): The default Network Name is the model name and the
maximum length is 22 characters (not including "Direct-xx-").
Network Key is the numeric string, and the size is 8 ~ 64 characters.
Click Next when the Confirm Printer Connection window appears.
Using a network cable
Your machine is a network compatible machine. To enable your machine to work with your
network, you will need to perform some configuration procedures.
NOTE: After completing the wireless network connection, you need to install a
machine driver to print from an application. See "Wireless network setup (Dell
See your network administrator, or the person that set up your wireless
network, for information about your network configuration.
• Items to prepare
– Access point
– Network-connected computer
– Software CD that was provided with your machine
– A machine installed with a wireless network interface
Printing a network configuration report
You can identify the network settings of your machine by printing a network configuration
See "Printing a network configuration report"