Download  Print this page

Advertisement

3
Load the print material with the side to be printed on facing up.
Depending on the paper type you are using, keep the following loading method:
Envelopes: load them with the flap side down and with the stamp area on the top
left side.
Transparencies: load them with the print side up and the top with the adhesive
strip entering the printer first.
Labels: load them with the print size up and the top short edge entering the
printer first.
Preprinted paper: load with the design face up, top edge toward the printer.
Card stock: load them with the print side up and the short edge entering the
printer first.
Pre printed paper: the printed side should be facing down with an uncurled edge
toward the printer.
4 Squeeze the width guide and adjust it to the width of the print material. Do not force
too much, or the paper will be bent, which will result in a paper jam or skew.
- 146
­

Advertisement

Table of Contents

   Related Manuals for Dell B2375dfw Mono

This manual is also suitable for:

B2375dnf mono

Comments to this Manuals

Symbols: 0
Latest comments: