Ad hoc via USB cable in Windows
If you do not have an access point (AP), you may still connect the machine wirelessly to
your computer by setting up an ad-hoc wireless network by following the simple steps
Items to prepare
Software CD that was provided with your machine
The machine installed with a wireless network interface
Check whether the USB cable is connected to the machine.
Turn on your computer, access point, and machine.
Insert the supplied software CD into your CD/DVD drive.
The software CD should automatically run and an installation window will appear.
If the installation window does not appear, click Start
X:\Setup.exe replacing "X" with the letter, which represents your CD/DVD drive and
click OK .
Select New Printer .