Fax Setup Wizard
Using an Answering machine
Dell B2375dfw Mono MFP
Dell B2375dnf Mono MFP
You can connect a telephone answering device (TAD) directly to the back of your printer as
shown in Figure 1.
Set your printer to Ans/Fax mode and set the Ring to Answer to a digit greater than the
Rings to Answer setting for the TAD.
A report with detailed information about the previous 50
communications operations, including time and dates. The
available options are On or Off.
Automatically reduces an incoming fax page to fit the size of the
paper loaded in the machine.
Discards a specific length from the end of the received fax.
Initiates fax reception from an extension phone plugged into the
EXT socket on the back of the machine. If you pick up the
extension phone and hear fax tones, enter the code. It is preset to
*9* at the factory.
Enables a user to use a single telephone line to answer several
different telephone numbers. You can set the machine to
recognize different ring patterns for each number. This setting may
not be available depending on your country
You can select the tray to printing the receive fax.
You can set the machine to print received faxes on both sides of
paper. The available options are Off, Long Edge, and Short Edge.
Frequently used functions are gathered for users to set fax settings
Telephone Answering Device