Download  Print this page

Advertisement

The Personal Identification Number (PIN) method helps you connect your machine to a
wireless network by entering the supplied PIN information on a Wi-Fi Protected Setup™
WPS-enabled access point (or wireless router).
Connecting in PBC mode
1
Press and hold the
The machine starts waiting for up to two minutes until you press the WPS (PBC) button
on the access point (or wireless router).
OR
(WPS) button (on the control panel)
Press
screen).
OR
Press My Settings
Connect via PBC from the home screen.
2
Press the WPS (PBC) button on the access point (or wireless router).
a
The light blinks fast on the WPS LED. The machine is connecting to the access
point (or wireless router).
b
When the machine is successfully connected to the wireless network, the WPS
LED light stays on.
Connecting in PIN mode
1
If you wnat to konw PIN number, printing network configuration report. See "Printing a
network configuration report"
2
Press
(WPS) button (on the control panel) less than 2 seconds
(from the home screen).
OR
Press My Settings
Connect via PIN from the home screen.
The machine starts connecting to the access point (or wireless router).
3
You need to enter the eight-digit PIN within two minutes on the computer that is
connected to the access point (or wireless router).
The LED blinks fast for up to two minutes until you enter the eight-digit PIN.
The WPS LED blinks in the order below:
a
The light blinks fast on the WPS LED. The machine is connecting to the access
point (or wireless router).
b
When the machine is successfully connected to the wireless network, the WPS
LED light stays on.
(WPS) button on the control panel for more than 2 seconds.
Machine Setup
Machine Setup
- 221
Connect via PBC (from the home
Network Setup
Network Setup
­
Wi-Fi
WPS
Connect via PIN
Wi-Fi
WPS

Advertisement

Table of Contents

   Related Manuals for Dell B2375dfw Mono

This manual is also suitable for:

B2375dnf mono

Comments to this Manuals

Symbols: 0
Latest comments: