Configuring Printer Properties
Using the Printer Properties window provided by the Printers configuration, you can
change the various properties for your machine as a printer.
1
Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
2 Select your printer on the available printers list and click Properties.
3 The Printer Properties window opens.
The following five tabs display at the top of the window:
•
General: allows you to change the printer location and name. The name entered
in this tab displays on the printer list in Printers configuration.
•
Connection: allows you to view or select another port. If you change the printer
port from USB to parallel or vice versa while in use, you must re-configure the
printer port in this tab.
Driver: allows you to view or select another printer driver. By clicking Options,
•
you can set the default device options.
•
Jobs: shows the list of print jobs. Click Cancel Job to cancel the selected job and
select the Show completed jobs check box to see previous jobs on the job list.
•
Classes: shows the class that your printer is in. Click Add to Class to add your
printer to a specific class or click Remove from Class to remove the printer from
the selected class.
4 Click OK to apply the changes and close the Printer Properties Window.
- 286