Passwords Page
Access the
page (see figure 66), by clicking the
link on the system
Passwords
Passwords
settings page.
Figure 66.
Passwords Page
The fields on the passwords page are for entering and verifying administrator and user
passwords. Passwords are case sensitive and limited to 12 uppercase and lowercase
alphanumeric characters. Each password must be entered twice: once in the User
Password field and then again in the Re-enter User Password field. Characters in these
fields are masked by asterisks ( ***** ). If password protection is not desired, leave the User
Password field and the Re-enter User Password field blank. After entering the desired
password in both fields, click
.
Submit
NOTE: An administrator password must be created before a user password can be
created.
Change a Password
To change a password, type the new password in the User Password and Re-enter
User Password fields and click
.
Submit
Clear a Password
To clear an existing password so that no password is required, enter a single space in the
User Password and Re-enter User Password fields and click
.
Submit
DMP 64 • HTML Operation
126