Cannot Print Over Appletalk Or Bonjour Networks - Canon iPF8400S User Manual

iPF8400S
Cause
The NetWare server and serv-
ices are not configured correctly.
The printer was turned off and
on when not disconnected from
the server.

Cannot print over AppleTalk or Bonjour networks

Cannot print over AppleTalk or Bonjour networks
Cause
The AppleTalk protocol is not ena-
bled on the printer.
The computer you are trying to
print from is not configured correct-
ly.
The computer and printer are not
on the same network.
User's Guide
4. If data transmission to a printer on another subnet fails, deactivate NCP burst mode in that printer's
network protocol settings.
5.
If the printer is used in queue server mode, specify Other/Unknown as the printer type.
Leave the printer off for at least 30 seconds, and then restore power.
Activate AppleTalk on the printer.
(See "Configuring the Printer's AppleTalk Network Settings.")
Make sure the computer's AppleTalk settings are configured correctly.
(See "Configuring the Destination for AppleTalk Networks (Mac OS).")
(See "Configuring the Destination for Bonjour Network (Mac OS).")
Due to the nature of Bonjour, you cannot print if the printer is on another network behind a router.
Make sure the computer and printer are on the same network. For information about network set-
tings, ask your network administrator.
Cannot print over AppleTalk or Bonjour networks
Corrective Action
Corrective Action
P.645
➔
P.644
➔
P.644
➔
875