Cannot Print Over Appletalk Or Bonjour Networks - Canon imagePROGRAF iPF6400SE User Manual

Cannot print over AppleTalk or Bonjour networks

Cause
The NetWare server and serv-
ices are not configured correctly.
The printer was turned off and
on when not disconnected from
the server.
Cannot print over AppleTalk or Bonjour networks
Cannot print over AppleTalk or Bonjour networks
Cause
The AppleTalk protocol is not ena-
bled on the printer.
The computer you are trying to
print from is not configured cor-
rectly.
The computer and printer are not
on the same network.
632
2.
Make sure there is enough free disk space on the NetWare file server. Insufficient disk space may
prevent you from processing large print jobs.
3.
Start NWADMIN or PCONSOLE and confirm that the print service is configured correctly and the
print queue is available.
4.
If data transmission to a printer on another subnet fails, deactivate NCP burst mode in that print-
er's network protocol settings.
5.
If the printer is used in queue server mode, specify Other/Unknown as the printer type.
Leave the printer off for at least 30 seconds, and then restore power.
Activate AppleTalk on the printer.
(See "Configuring the Printer's AppleTalk Network Settings.")
Make sure the computer's AppleTalk settings are configured correctly.
(See "Configuring the Destination for AppleTalk Networks (Mac OS).")
(See "Configuring the Destination for Bonjour Network (Mac OS).")
Due to the nature of Bonjour, you cannot print if the printer is on another network behind a router.
Make sure the computer and printer are on the same network. For information about network set-
tings, ask your network administrator.
Corrective Action
Corrective Action
P.523
➔
➔
P.521
➔
iPF6400SE
P.521
User's Guide