Cannot Print Over Appletalk Or Bonjour Networks - Canon iPF815 User Manual

Cause
The computer you are try-
ing to print from is not
configured correctly.
The NetWare server and
services are not config-
ured correctly.

Cannot print over AppleTalk or Bonjour networks

Cause
The AppleTalk protocol is not
enabled on the printer.
The computer you are trying to
print from is not configured
correctly.
The computer and printer are
not on the same network.
iPF815
Make sure the computer's NetWare settings are configured correctly.
(See "Configuring NetWare Network Settings.")
Check the following points.
1. Make sure the NetWare file server is running.
2. Make sure there is enough free disk space on the NetWare file server. Insufficient
disk space may prevent you from processing large print jobs.
3. Start NWADMIN or PCONSOLE and confirm that the print service is configured
correctly and the print queue is available.
4. If data transmission to a printer on another subnet fails, deactivate NCP burst mode
in that printer's network protocol settings.
5. If the printer is used in queue server mode, specify Other/Unknown as the printer
type.
Activate AppleTalk on the printer.
(See "Configuring the Printer's AppleTalk Network Settings.")
Make sure the computer's AppleTalk settings are configured correctly.
(See "Configuring the Destination for AppleTalk Networks .")
(See "Configuring the Destination for Bonjour Network .")
Due to the nature of Bonjour, you cannot print if the printer is on another net-
work behind a router. Make sure the computer and printer are on the same net-
work. For information about network settings, ask your network administrator.
Troubleshooting > Cannot print over a network
Corrective Action
→P.739
Corrective Action
Cannot print over AppleTalk or Bonjour networks
>
→P.741
→P.742
→P.747
12
819