Paper Jams Inside The Print Engine; Clearing Jams In Transfer Drawer (Area 2) - Xerox Versant 2100 Press Quick Start Manual

Paper Jams

Paper Jams inside the Print Engine

The press touch screen displays paper jam notifications and indicates the areas of the
press that need to be cleared. There are three main module areas of the print engine
where paper jams may occur:
The Registration area behind the Front Left Door (Xerographic Drawer, Transfer
Drawer and Paper Handling Drawer)
Fuser Assembly and Decurler area behind the Front Center Door
Inverter and Entrance/Exit areas of the Output/Cooling Module behind the Front
Right Door
Tip
Always check the Output Module first for a paper jam at the entrance of the module.
Rotate the green knobs to pull paper through the entrance areas completely. Always
ensure that all paper jams, including any small ripped pieces of paper, are cleared before
proceeding with your print job.
Warning
Never touch a labeled area (found on the fuser unit or nearby) indicating High
Temperature andCaution. Contact can lead to burns.

Clearing Jams in Transfer Drawer (Area 2)

There are several jam clearance areas of the Transfer Drawer: Registration and Alignment
Transport, Registration Roll, Duplex Transport and entrance to Fuser.
1. Make sure that the press has stopped printing before opening doors.
2. Open the Front Left and Center Doors.
6-2 Xerox ® Versant 2100 Press
Quick Start Guide