Unit Repair; Major Unit - Daewoo KORANDO Service Manual

UNIT REPAIR

MAJOR UNIT

Preceding Work : Removal of the transmission
Removal of the transfer case
Disassembly Procedure
1. Install the removed transmission into a fixture.
2. Remove the drain plug and drain the oil. Using a 13 mm
wrench, remove the clamp bolt and position the offset lever
in the 3-4 position of neutral.
Notice
Removal of the offset lever in a position other than 3-4 of
neutral will be difficult.
3. Using a pin punch and a hammer, remove the roll pin to
remove the shift lever from the offset lever.
4. Using a 15 mm wrench, remove the 8 bolts from the extension
housing.
5. Separate the extension housing from the case and shift
cover.
Separate the offset lever from the shift.
Notice
Do not remove the offset lever while the extension housing
is still assembled to the case.
6. Remove the offset lever from the extension housing with
the detent ball and spring.
7. Remove the roll pin from either the offset lever or extension
housing.
MANUAL TRANSMISSION 5B-17