Daewoo KORANDO Service Manual page 1327

Removal & Installation Procedure
preceding work : removal of steering wheel
1. Turn the ignition switch to "OFF" position and disconnect
the battery negative cable. Start the procedure after waiting
over 3oseconds.
2. Unscrew 3 screws from lower cover on steering column shaft
and remove the lower cover.
3. Unscrew 4 screws from clock spring and remove the clock
spring
Installation Notice
Don't try to repair and modify the clock spring.
When aligning the neutral position, turn to clockwise until it
stops, and turn to counter clockwise until the marks are
aligned
SUPPLEMENTAL RESTRAINT SYSTEM(SRS) 8B-19