Daewoo KORANDO Service Manual page 747

1F3-20 OM600 ENGINE CONTROLS
Tools Required
617 589 04 21 00 Tester
1. Disconnect the fuel line (2) from the fuel filter.
2. Remove the banjo bolt (4) from the fuel injection pump and
remove the seals (3) and fuel line (2).
3. Connect the tester (5).
4. Start the engine and read off the fuel pressure on tester
(5).
Notice
At idle Speed
At full load
If out of standard, replace the fuel feed pump.
5. Stop the engine.
6. Remove the tester.
7. Replace the seal and connect the fuel line (2).
> 0.3bar
> 0.5bar
Tester 617 589 04 21 00