Daewoo KORANDO Service Manual page 1262

6E-4 STEERING WHEEL AND COLUMN
5. Release the weld clip and disconnect the wire connectors.
6. Disconnect the vacuum hose from ignition switch (Diesel
only).
7. Remove the combination switch assembly.
8. Disconnect the steering column shaft from lower shaft by
unscrewing the bolt.
Installation Notice
Tightening Torque
9. Unscrew the steering column housing fixing bolts to fixing
bolts to floor.
Installation Notice
Tightening Torque
30 - 40 Nm
9 - 14 Nm