7B/C-16 MANUAL & SEMIAUTO-HVAC
Removal & Installation Procedure
1. Disconnect the inlet and outlet pipes of condenser.
Notice
Before disconnection, evacuate the refrigerant from the
system.
Tightening Torque
Notice
When installing, check the O-ring and apply compressor oil.
2. Remove the mounting bolts (2EA) and condenser assembly.
Installation Notice
Tightening Torque
3. Remove the main condenser fan from condenser.
4. Installation should follow the removal procedure in the
reverse order.
Inlet Side to 10 - 15 Nm
Outlet Side to 4 - 6 Nm
4 - 6 Nm