MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
AIR BAG MODULE
Removal & Installation Procedure
1. Remove the steering wheel rid (LH,RH) with a screwdriver.
Installation Notice
Each position mark (LH,RH) is stamped on the inner surface
of the rids.
2. Unscrew the bolts from both sides.
Installation Notice
Tightening Torque
3. Disconnect the connectors and remove the air bag module.
4. Installation should follow the removal procedure in the
reverse order.
SUPPLEMENTAL RESTRAINT SYSTEM(SRS) 8B-17
7 - 11 Nm