Daewoo KORANDO Service Manual page 884

3A-20 FRONT DRIVE AXLE
2. Assemble the parts of the drive pinion.
Tightening Torque of the
Lock Nut
3. Assemble the parts of the differential carrier.
Tightening Torque of the
Ring Gear Bolts
4. Measure backlash of the side gear and pinion.
Standard
5. Install the differential carrier assembly into the axle housing.
Tightening Torque of the
Bearing Cap Bolts
Notice
Be careful not to change the caps. Be sure to keep the
original position of the caps.
240 - 310 Nm
75 - 90 Nm
0 - 0.05 mm
48 - 69 Nm