Daewoo KORANDO Service Manual page 900

Removal & Installation Procedure
1. Remove the tire.
Installation Notice
Tightening Torque
2. Release the parking brake.
3. Remove the bolts and the brake caliper.
Installation Notice
Be careful not to damage the brake hose.
Tightening Torque
4. Remove the brake disc.
Notice
To remove the disc, install the bolts (M8 x 1.25) into the
service hole and uniformly tighten the bolts.
5. Disconnect the parking brake cable.
Steel Wheel 80 - 120 Nm
Aluminum Wheel 110 - 130 Nm
85 - 100 Nm
REAR DRIVE AXLE 3D-7