Inspection Procedure
1. Check the distance of tie rod and toe-in data and, if
necessary, adjust as below.
2. Adjustment
Unscrew the adjuster nut (1) and adjust the distance by
turning the rod (2) counterclockwise.
Distance of Tie Rod
Check the toe-in date (A~B)
Toe-in
If the ton-in is normal, tighten the adjuster nut (1) to the
specified toque with tie rod (2) being fixed.
Tightening
Torque
152mm
0 - 4 mm
65 - 80Nm
POWER STEERING SYSTEM 6A-9