Pre-Installation Checks - Daewoo KORANDO Service Manual

PRE-INSTALLATION CHECKS

Checking Procedure
1. Separate the clutch release fork from the pivot and remove
the pivot from the clutch housing.
2. Check the pivot. Fork and release bearing.
3. Check the pressure plate spring.
Notice
Inspect each parts and replace the excessively worn parts.
4. Check the clutch housing alignment as follows :
Place the magnetic base on the pressure plate spring.
Check the housing bore alignment.
- Place the dial indicator on the bore.
- By rotating the crankshaft one revolution, record the
dial indicator reading.
MANUAL TRANSMISSION 5B-45