Daewoo KORANDO Service Manual page 1372

9E-4 INSTRUMENTATION/DRIVER INFORMATION
CLUSTER
Removal & Installation Procedure
1. Loosen the screw and remove the fascia assembly (1).
Notice
When assembling, there should be no clerance between
crash pad assembly (4) and cluster fascia assembly, and
the clearance between combination meter (3) and cluster
fascia have to be maintained 2mm.
2. Remove 4 screws.
3. Disconnect connectors and remove the combination meter.
4. Installation should follow the removal procedure in the
leverse order.
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE