Table of Contents
Advertisement
5C-8 CLUTCH
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
BLEEDING OF CLUTCH SYSTEM
Bleeding Procedure
Notice
Keep the fluid level over 'MAX' in reservoir during
bleeding operation.
Do not let fluid contact a painted surface.
1. Remove the air bolt cap of the release cylinder.
Connect a vinyl tube to the bolt.
2. Insert the other end of the tube in a vacant container.
3. Slowly depress the clutch pedal sever81 times.
4. With clutch pedal fully depressed, open the air bolt and
release air rind fluid in the fluid line,
5. Repeat this procedure until there are no more air bubbles
in the fluid flows.
Advertisement
Chapters
Table of Contents
