Daewoo KORANDO Service Manual page 1308

8A-4 SEAT BELT
GENERAL DESCRIPTION
AND SYSTEM OPERATION
DRIVER SEAT BELT WARNING
The driver's safety belt incorporates a safety belt
reminder light in the instment cluster remind the driver if
the safety belt is not fastened when the ignition is turnd
ON.
OPERATION AND FUNCTIONAL
CHECKS
Caution:
Keep sharp objects and potentially damaging
objects away from the seat belts.
Avoid bending or damaging any portion of the
buckle or the latch plate.
Do not bleach or dye the belt webbing. Use only
mild soap and water in order to clean the belts.
When installing the seat belt anchor bolts and
the screws, start the bolts and screws by hand
in order to prevent crossthreading.
Do not attempt any repairs on the retractor
mechsemblies with new assemblies.
Replace any belts that are cut r damaged in any
way.
1. Inspect all saet belt anchor bolts and the screw in
order to verify that they are secure.
2. Inspect the seat belt buckle. The buckle must lock
and unlock easily.
3. After inserting the latch into the buckle, tug sharply
on the belt. The buckle must remain locked.
4. Fully extend the shoulder belt portion to make sure
that there is no twisting or tears in the belt.
5. Let the shoulder belt retract fully. The belt should
retract easily.