Daewoo KORANDO Service Manual page 1174

7. Remove the center mounting nuts and end sides mounting
bolts of the cross member and then remove the cross
member.
Installation Notice
Tightening Torque(1)
Tightening Torque(2)
8. Remove the transfer case by removing the bolts attaching
the transfer case to the transmission.
Installation Notice
Tightening Torque
Notice
Apply long-term grease to the inner spline of the transfer
case input shaft.
9. Installation should follow the removal procedure in the
reverse order.
TRANSFER CASE (PART TIME 4408) 5D1-13
21 - 35 Nm
62 - 93 Nm
38 - 51 Nm