Axle - Daewoo KORANDO Service Manual

AXLE

Removal & Installation Procedure
1. Lift up the vehicle and support the frame safely.
2. Remove the axle shaft.
3. Remove the propeller shaft from the rear axle input shaft.
Installation Notice
Tightening Torque
Notice
Place alignment marks before removal.
4. Disconnect the parking brake cable and brake hose.
5. Remove the lower arm mounting nuts and remove the lower
arm from the axle housing.
Installation Notice
Tightening Torque
81 - 89 Nm
150 - 180 Nm
REAR DRIVE AXLE 3D-9