Daewoo KORANDO Service Manual page 1222

5D2-24 TRANSFER CASE (TOD)
Stage
Check resistance of electro-magnetic clutch.
1. Disconnect 30 pin connector from TOD control unit.
2. Measure resistance between pin 3 and 7 in wiring
C3
connector using multi-tester.
- Specified value
- Measured value is within specified range?
Test Stage / Contents
Test Contents and Procedure
Result
Countermeasure
Specified Value
/Yes/No
2.5W
Yes Perform C4 stage
No 0W : short
¥ W : open