Daewoo KORANDO Service Manual page 1154

5C-10 CLUTCH
Removal & Installation Procedure
1. Remove the starter motor. Install the special tool to the
flywheel through the starter motor mounting holes.
2. Unscrew the release cylinder mounting bolts and remove
the release cylinder.
3. Unscrew the clutch housing bolts and remove the clutch
housing, release fork and release bearing.
Installation Notice
Tightening Torque
4. Insert the centering pin into the clutch spline.
Loosen the clutch cover bolts 1/2 turn in crisscross sequence
until the spring tension is released.
Notice
Do not remove the bolts at a time, or clutchcover can be
damaged or deformed.
Engine Lock 602 589 00 40 00
44 Nm
Centering Pin 661 589 00 15 00