Daewoo KORANDO Service Manual page 1417

Removal & Installation Procedure
1. Remove the hood striker assembly.
Notice
When installing, tighten the bolt after setting the hole
between wratch and hood striker assembly.
Installation Notice
Tightening Toque
2. Remove the hood bolt(2EA) of hood lifter assembly.
Installation Notice
Tightening Toque
3. Remove the hood lifter assembly from the upper ball stud.
Notice
Insert the hood lifter assembly into ball stud fully until it
sounds "click".
4. Loosen the hood hinge assembly bolt and remove the hood.
Installation Notice
Tightening Toque
5. Installation should follow the removal procedure in the
reverse order.
8 - 11 Nm
14 - 26 Nm
13 - 26 Nm
BODY FRONT END 9R-3