Table of Contents
Advertisement
9R-4 BODY FRONT END
Adjustment Procedure
1. Alignment between hood striker and latch hole.
Loosen the mounting bolt of hood latch slightly and adjust
hood in forward/rearward and left/right directions. Then
align the center between hood striker and latch hole.
Notice
Tighten the bolt fully after alignment.
Installation Notice
Tightening Toque
2. Adjusting the height of hood overslam bumper.
Unlock the hood and check the clearance between hood
and fender by adjusting the hood overslam bumper in left/
right directions.
Normal
13 - 26 Nm
20 - 22 Nm
Advertisement
Chapters
Table of Contents
