Accelerator Pedal Module - Daewoo KORANDO Service Manual

ACCELERATOR PEDAL MODULE

1 Accelerator Pedal
2 Accelerator Pedal Sensor
3 Bolts (2 Pieces) ....................................... 4-8 Nm
Removal and Installation Procedure
1. Disconnect the 6-pin connector(arrow).
2. Unscrew the 2 bolts (3) / 1 nut (6) and remove the pedal
and sensor assembly.
Installatoin Notice
Tightining Torque
2. Installation should follow the removal procedure in the
reverse order.
4 6-Pin Connector
5 Kick down Switch
6 Nut (1 piece) ............................................ 4-8 Nm
4 - 8 Nm
M161 ENGINE CONTROLS 1F2-79