Daewoo KORANDO Service Manual page 1119

23. Remove the main shaft in 2 steps.
To remove the rear bearing outer race, push the main
shaft rearward.
Tilt and lift the main shaft from the case.
24. Remove the reverse fork and spring from the case.
25. Remove the counter shaft as follows:
Using a punch and hammer, pry up the lock tabs.
Using a 13 mm wrench or T-40 bit, remove the 4 bolts.
Remove the retainer and shim from the case.
Push the counter shaft rearward to remove the rear
bearing outer race.
MANUAL TRANSMISSION 5B-21